Static Control

South Coast Enterprises - Chemical Safe Laboratory Furnishings

Static Control
For Laboratories and Cleanrooms

The control and elimination of static charge has far reaching effects on almost every aspect of today’s high technology manufacturing operations. This is just a short list of the problems caused by static charge:

Damage to electronic devices from Electro Static Discharge (ESD)

Particle contamination due to the attraction of particles to statically charged product surfaces.

Unwanted particles and dirt is bonded to surfaces.

Layers or objects sticking to each other.

Layers or objects separating or moving out of position.

Automation computer errors and lockups.

Inability to control a processing operation.

Measurement devices do not provide repeatable results (scales, meters, sensors).

Shocking of personnel.

Correctly grounding of electrically conductive items and the use of air ionization is the proven technology that controls and eliminates static charge. South Coast Enterprises can supply the technical support, product knowledge and the industries’ best, most cost effective and reliable products to eliminate static charge. We welcome the opportunity to help you solve these problems and prevent the undesirable effects of static charge. We offer a library full of free technical application notes for your request and use.

Chemical Storage Cabinets

1.
Acid Storage Cabinets

2. Polypropylene_Polyethylene_Storage Cabinets

3. Flammable Storage Cabinets

4. Adjustable Shelf Cabinets

5. Painted Steel – Fire Rated Acid Chemical Storage Cabinets

6. Polyethylene Acid Chemical Storage Cabinets

Chemical Transport Carts

1.	Acid-Corrosive Chemical
2.	UFC Compliant Econo-Carts
3.	Flammable Chemical

Furnishings

1.	Furnishings

Desiccator Cabinets

1.
Desiccator Cabinets

Static Control

1.	Static Control

Custom Products

1.	Custom Products

Ionization for Control of Static Charge
Model 6115 AirForce Ionizing Blow Off Gun for N² or Air	Model 6110A Ionizing Air Cartridge	Model 6422 / 6422e Point of Use Ionizing Blower	Model 6432 / 6432e Local Area Ionizing Blower
Model 6442 Benchtop Ionizing Blower	Model 6460-32 (2 Fan) / 6460-44 (3 Fan) Full Coverage Ionizing Blower	Model 6480T Turbo Blower	Model 5685 AeroBar
Workstation Monitoring for Operator and the Working Surfaces and Tools
Model M200 Low-Cost body Voltage/Ground Workstation Monitor
Instrumentation to measure static charge and ionizer performance
Model 775 Electrostatic Fieldmeter	Model 775PVS Fieldmeter with Periodic Verification System	Model 210 Charged Plate Monitor	Model 280 Digital Charged Plate Monitor

BACK TO TOP

Ionizers Ionizers control and eliminate static charges that cause device damage due to ESD (electro static discharge) and drastically enhance particle attraction that causes contamination and low product yields.
Model 6115 Hand Held Ergonomic Static Discharge Gun For use with Nitrogen or Air with very flexible hose. BACK TO TOP	Discharge Time: ±1000-100V 1.0 seconds at 6”, 30 psi, Tested in accordance with ANSI/ESD STM3.1-2000 Console Gas Input: 20 – 65 psi, Clean Dry Air (CDA) or nitrogen Gas Air Filter: 99.9% efficient, 0.1 micron or larger Dimensions: Gun: 8”L x 3”W x 1”D Console: 8.5”L x 3.0”W x 1.6”D Weight: Gun: 12 oz with 7’ air hose Console: 11.5 oz
Model 6110A Ionizing Air Cartridge Ideal for fixed position air driven static discharge and particle / contaminate blow-off. BACK TO TOP	Coverage Area Dimensions: 2.2”D x 3.1”L Weight: 6 oz
Model 6422 / 6422e Point of Use Ionizing Blower Ideal for in-tool or small area applications. Only 4.95”H x 4.10 W x 2.48D with bracket. BACK TO TOP	Coverage Area Typical Application Volume: Spread 6"-12" width at 12" to 48" distances.
Model 6432 / 6432e Local Area Ionizing Blower Table top or in-tool applications, compact size with excellent static discharge. 5.3”H x 5.0”W x 2.5”D with stand. BACK TO TOP	Coverage Area Typical Application Area: Spread 12"-18" width at 12" - 48" distances.
Model 6442 Benchtop Ionizing Blower Excellent for table top applications, dual fan speeds, auto emitter point cleaner, very clean white powder coated product, 10.5 H x 7.6”W x 5”D. BACK TO TOP	Coverage Area Typical Application Area: Spread 12"-24" width at 12"-48" distances.
Model 6460-32 (2 Fan) / 6460-44 (3 Fan) Full Coverage Ionizing Blower Idea for overhead table top applications with broad coverage areas, excellent balance and discharge times. Dual fan speeds, auto emitter point cleaner, alarm relay closure, multicolor LED indicator. Two fan version is 32” long. Three fan version is 44” long Both are 3.6”H x 6”W, BACK TO TOP	Coverage Area Typical Application Area for 32” 2-Fan Blower: 24" x 36" at 24" distance from fans. Typical Application Area for 44” 3-Fan Blower: 24" x 48" at 24" distance from fans.
Model 6480T Turbo Blower with large ionization footprint, built-in heater, mounting in any position, emitter cleaner, very fast discharge times, dual fan speeds, excellent balance and much more. Newly designed to beat all competition! 7.7”H x 6.1”W x 26.4”L with stand. BACK TO TOP	Coverage Area Typical Application Area: 36" x 48" at 48" distance from fans with discharge time less than 10 seconds.
Model 5685 AeroBar for Laminar Flow Stations and many other applications to eliminate static charge without blower fans. BACK TO TOP	Available with Titanium or Silicon Emitter Points Four lengths available – 11”, 22”, 44” and 64” Typical applications: Perfect for a laminar flow station or good air flow areas Plug and Play Technology with Iso-Stat Stead-State DC Technology. No tuning is necessary to achieve excellent static discharge.
Workstation Monitoring BACK TO TOP
Model M200 Low-Cost Body Voltage/Ground Workstation Monitor Dual Wire Body Voltage Detection provides accurate operator monitoring (Not the cheap and error prone resistance and capacitance technology!) BACK TO TOP	Features: Two wrist strap body voltage monitoring. Soft ground monitoring for table mats. Hard ground monitoring for tools. Detects the operator in contact with unwanted DC or AC voltages from un-grounded soldering irons and other tools. Digital Design with single push button programming. Small size: 2.6” x2.2” x 1”. Stainless Steel Case Multiple audible tones differentiate each operator and channel. Red and Green LED indicators. Remote wrist strap plug in boxes available. High reliable plugs and jacks. Coil stretch wrist strap cords. Adjustable cloth or metal wrist straps. Calibrated with certificate.
Instrumentation BACK TO TOP
Model 775 Electrostatic Fieldmeter Measures Static Charge Voltages BACK TO TOP	Digital display Distance ranging lights Chopper-stabilized circuit SAMPLE and HOLD functions Battery powered, pocket-sized meter Analog output Dimensions: 4.2”L x 2.4”W x 0.9”D Weight: 5 oz with battery
Model 775PVS Fieldmeter with Periodic Verification System Measures Static Charge Voltages and Ionizer Discharge BACK TO TOP	Digital display Distance ranging lights Chopper circuit NIST-traceable calibration
Model 210 Charged Plate Monitor BACK TO TOP	User-selectable charging levels (1 or 5KV) and stop levels (50, 100 or 500 V) Displays floating offset voltage, peak voltage swing, and long-term average balance Unique LED bar graph for easy positive and negative balancing Analog output Dimensions: 6”H x 9”W x 10”D Weight: 7.5 lbs
Model 280 Digital Charged Plate Monitor BACK TO TOP	Delayed measure start Portable, battery operated User programmable test protocol Detachable plate with varying sizes Onboard data archiving memory Analog and digital LCD display Dimensions: 11”W x 9”L x 5”D Weight: 12.5 lb